Having a stereo system in your car, to make your journey more enjoyable, is a must. But, the problem arises when your car speakers get out of order or you want to upgrade the speakers. Wouldn’t it be great if you get to know the steps to install your car speakers by yourself?
Yes, you heard it right!
Speaker installation in cars is not that much difficult. What you need to do is to get some guidance regarding basic steps to do the task. Also, it does not cost you much as it requires some basic tools along with free time.
Here, in this article, we have found a few ways to get you covered in this regard. On the basis of extensive research and personal experience, we have made a list of some easy steps that can be followed to install a car speaker.
Let’s look at them in detail:
Preparing to Install the Car Speakers:
Before you go for the actual attempt of installation, you need to check a few things to get fully prepared to install the speakers.
Choose Speakers Wisely:
Since the speakers do not work on their own, so there must be a stereo system to which you can connect your speakers to get good audio quality. The systems that have limited power and wattage, cannot be connected to too many speakers. Before choosing a car speaker, you need to keep in view the power of your stereo system, then you have to choose the number of speakers accordingly.
Apart from that, you also have to check the size and dimensions of the old speaker so that you can buy the new one having the same dimensions. This will make it easy for you to fix the speakers at the original place.
Lastly, you should not ignore the quality of the speakers along with the stylish trim packages. Also, the power connections are of great importance. The new speakers that you want to install must be able to get connected to the factory wiring so that you do not have to work a lot on it.
Related: Top 10 Best Double Din Head Units That You Need To Consider
Gather Some Basic Tools:
To take out the old speakers and to fix the new one in its place, you will surely require some basic tools. There is no hard and fast rule to have some specific types of tools but for your convenience, we have made a list of some basic things that you better keep in stock every time.
This includes different types of screwdrivers, strippers, crimping tools, wrenches, soldering iron, electric drill, file, Torx driver, panel popper, and electrical tape.
These are the basic tools that are required to replace car speakers but you might need some other tools depending upon the type of stereo system or wiring you have in your car.
Disconnect the Battery:
Next, you have to disconnect the battery. As soon as you start doing work with electrical wires, you need to make yourself and your system safe. If you do not disconnect the battery, there is a risk of a short circuit or system collapse. So, it is important to disconnect the battery to make yourself and the system safe and secure.
Installing the New Speakers in Your Car:
When you are done preparing for the installation, next comes the installation of speakers. For this purpose, you need to follow a few steps. Mind that, these steps may vary in the case of different speakers.
As you know that there are different types of speakers having totally different setups. Some might need no extra effort to get them mounted. Others could be way too complex to get installed. So it all depends on the different types of speakers you come across.
That said, it is quite possible that we may not cover all the steps regarding the installation procedure of the new speakers. But we’ll try our best to address the major. So with that being said, let’s move ahead, to begin with, the discussion, which is as follows:
Remove the Protective Panel:
In mostly all the cars, the speakers are covered with some protective shields and panels. To work on the speakers you need to first take off those panels to get direct access to the speakers. For this purpose, you can use screwdrivers if there are any bolts or screws present on it. Else, you can use the popping tool, if the panel is fixed with the help of clips.
Take Out the Old Speakers:
Moving to further steps, next you have to remove the previous speakers. Here you have to be careful regarding the wiring that is attached to the speakers. While removing them, you may make this huge mistake by simply pulling out the speakers wildly.
This can have some serious consequences, and would also end up in nothing but a mess.
What’s the next step?
Place the New Speakers:
Next, you have to fit your new speakers in the space, in order to get that fixed. While you do so, you better make sure that you check all the wirings whether they are compatible with your new speakers or not.
Having said that, the next thing you must do after that is to connect the electrical system of your car with the new stereo. It doesn’t require something complex to do. On the other side, you must avoid the use of tape to connect the wires.
Related: List of Best 6×9 Audio Speakers For This Year
Keep a Check at its Functioning:
Well, that’s obvious. What else you must be doing after installing the speakers than to check its functioning? That makes pretty much sense.
Right after you fit the speaker inside the space, you must check its proper functioning, at every available volume-level. Also, you must ensure that there are no extra vibrations mixing up with the soundtrack.
These are all the highlights that are important to keep in mind while you plug and play the new speaker right after the installation.
Put the Protective Panel Back:
Now that everything is going fine, you just have to put all the things back in their place. Get the screws tightened, dust the powder off, and put the protective panel back in place, in order to have the real shape of the stereo system back.
And that is all!
That is where your new speakers’ installation process comes to an end. If you have made sure all the steps are done carefully, then there is no chance of having the terrible installation on your own.
With that being said, let’s now get to the discussion that why do you feel a need to change your car’s audio system.
So, let’s begin:
Why You Need to Change Your Car’s Speakers?
People normally don’t know how much of a difference can a new speaker set make to your car’s audio system. You can literally boost the quality of every track with the new and enhanced speaker system.
Moreover, if your speakers are getting out of order, for they have a limited lifespan, then you have to make upgrades in order to get that fixed.
So turns out that the other possibility can be that you have the poor stereos in your car, and you don’t want to miss out on the quality of the background sounds you get while driving. This is it.
Does it cost too high to get the speakers installed in your car?
There are multiple rates at which you can get your new speakers installed in your car. But when you can have it done on your own, then why spending your hard-earned money on it? By the way, it doesn’t cost too much to get the speakers installed. As high as 80 dollars is the most common rate currently.
Is it easy to install car speakers?
As we’ve already discussed earlier that it is quite easy to install the new speakers in your car, in order to have a better sound-producing system. All you have to do is just follow some important steps.
Can 2 speakers be connected to one channel?
Yes, you can connect two speakers with one amplifier or one channel. There is nothing absolute about it. Although there are two possible ways in which you can connect the two speakers.
Other than that, it doesn’t work out normally. And these two ways include parallel connectivity and series connection.
How to match your new speakers with the amplifier?
Many people don’t know how to set up the new speakers with the amplifier. Well, it is a no-brainer. You just have to choose such an amplifier that can deliver the impedance up to two times of the continuous power rate.
Some Last Words:
So this was all about the highlight of the best possible ways to learn how to install car speakers. I hope you found that helpful and got to know what it requires to fix your car’s audio system on your own.
Leave a Reply